Want your Christmas tree to stay fresh and green through the season and beyond? Try these simple tips.

Here’s a how-to guide that offers our secrets for making your cut Christmas tree last throughout the entire holiday season.

Christmas tree last
The first step is to buy the freshest Christmas tree you can find—in fact, cut it yourself if possible.Christian Vandervort

You’ll need a:

It helps to have:

  • Disposable latex gloves
  • WD-40
  • An assistant

Step-by Step Instructions

1Cut your own tree.The problem with trees bought in Christmas tree lots is that most were cut several days—if not weeks—before they reached the lot. The only way to get a truly fresh tree is to cut it at a Christmas tree farm. Disposable latex gloves will protect your hands from sap and pitch. (If you do get pitch on your hands, apply cooking oil with a paper towel to remove it.)

2Stretch a plastic sandwich bagaround the cut end of your tree and fasten it on with a rubber band immediately upon cutting the tree. After you’ve loaded your tree into or onto your vehicle, head home immediately—no stopping for brunch!

3After you get the tree home,lay it on its side and use a tree saw to make a straight cut, removing about 1 inch off the bottom of the trunk. Applying WD-40 to the saw blade before cutting will keep the blade moving freely in the cut.

After you get your tree home, cut off about 1 inch from the bottom of the trunk.©Don Vandervort, HomeTips

4Using a 1/2-inch drill bit,钻一个洞直接进了树干的底部to receive the spike at the bottom center of the Christmas tree stand. Then drill three or four holes around the edge of the trunk where it will be submerged in water. This will help it absorb the water.

Drill a straight hole into the base of the trunk.©Don Vandervort, HomeTips

5Push the stand’s containeronto the trunk so that the bottom drill hole sits on the stand’s inner spike; secure the stand in place with a few quick blows of a rubber mallet.

6Finger-tighten the eye boltsso the trunk is centered evenly in the stand. Then use a screwdriver to tighten the eye bolts securely.

Secure the stand and tighten the bolts.©Don Vandervort, HomeTips

7Lift the tree into standing position.(Have your helper designate the tree’s “front.”) Set the stand in place, and then lift and secure the tree and container into the base.

Lift the tree into a standing position.©Don Vandervort, HomeTips

8Immediately fill the containerwith water and add in a package of tree nutrients for extra longevity (this can be bought at a local nursery and most Christmas tree lots). Adding aspirin to the tree’s water also increases the tree’s ability to absorb nutrients.

9Check the tree’s waterat least three times per day for the first few days and then daily. To prevent the base of the tree from sealing up, be sure to keep the container at least half full of water at all times. (You can set short length of PVC pipe into the basin to make it easy to add water without having to crawl under the tree!)

10Place the tree away from heat sourcessuch as registers, vents, and fireplaces to keep its branches from drying out.

Happy Holidays!

How to Hang Christmas Lights
The Best Way to Store Christmas Lights
Ladders: The Ultimate Guide to Choice and Safe Use
8 Things to Do Before Guests Arrive
How to Get Your Home Ready for Overnight Guests

Author Image
About Don Vandervort
Don Vandervort has developed his expertise for more than 30 years, as Building Editor for Sunset Books, Senior Editor at Home Magazine, author of more than 30 home improvement books, and writer of countless magazine articles. He appeared for 3 seasons on HGTV’s “The Fix,” and served as MSN’s home expert for several years. Don founded HomeTips in 1996.Read more about Don Vandervort